Pilot plant for the manufacture of thermoplastic films

a) Monolayer film extruder

Brand and model: York

Capacity: 20kg/h, plates according to head of 20 cm wide and a thickness ranging between 25-45 microns.

Description: Single screw blowing extruder used to produce synthetic (polyethylene, polypropylene) and biodegradable (polylactic acid, PLA and polybutylene adipate-co-terephthalate, PBAT) plastic films.

b) Multilayer film extruder

Brand and model: Labtech Engineering Co. LF-400.

Capacity: 12 kg/h, plates according to head of 30 cm wide and a thickness ranging between 25-45 microns.

Description: Three-layer blowing extruder with 3 extruders of 20 mm in diameter of screw and at a L7D ratio of 30. This plant allows producing multilayer films from different thermoplastic materials such as polyethylenes, polypropylenes and biodegradable plastics (polylactic acid, PLA and polybutylene adipate- co-terephthalate, PBAT).